What is the workshop spray dust removal system?

The spray dedusting system in workshop is a new environment-friendly dust removal method. It is easy to install, simple to operate and low in maintenance cost. The water is atomized into 1-5 micron fine water mist. The fine water mist has strong adsorption and adhesion. The fog particles adhere to the dust and make it increase and fall, and can not be raised again.

Workshop spray dust removal principle:

The spray dust removal system uses more water mist to adsorb the dust in the air, so that dust can gather together and fall together. With the rapid development of city and industry, there are more and more dust and fine particles in the air. Make people feel dry skin, breathing is not smooth. The green garden spray and dust removal system adopts Italy AR pump. It works for 24 hours continuously. The spray dedusting equipment will pressurize the filtered water to 60-80 kilograms. Then, the water will be sent to the high-pressure atomizing nozzle through the high-pressure pipeline. The water will be atomized into 1-5 micron water spray through the nozzle. The fine water mist has strong adsorption and adhesion. Fog particles maintain air humidity without water accumulation, creating a healthy and pleasant environment to ensure that people working and living in it can breathe clean and pure air.

What is the workshop spray dust removal system

The advantages of the spray dust removal system are:

1. spray dedusting system is low in cost and easy to maintain.

2. The amount of fog is large, fine and even, and there is no dead angle in dust removal.

3. use spray cooling to protect environment and pollution-free animals and plants.

4. Quick effect, can reduce the temperature in a short time

5. Wide cooling area, can solve the limitation of other cooling products

6. Low cost, only 1 / 5 cost of other cooling products

7. It is easy to operate and maintain, and can be maintained by itself without professional personnel

The spray dedusting system in workshop is a new environment-friendly dust removal method. It is easy to install, simple to operate and low in maintenance cost. The water is atomized into 1-5 micron fine water mist. The fine water mist has strong adsorption and adhesion. The fog particles adhere to the dust and make it increase and fall, and can not be raised again.

Lastest Posts

How to Install Brass Misting Nozzles

Installation of atomizing nozzle seems simple, but if you do not pay attention to the small details of installation, it will also affect the atomization effect and service life of...

how to keep misting nozzles from clogging?

1、 Water mist nozzle blocked due to installation problem Improper installation of water mist sprinkler will cause hidden troubles for the water mist nozzle. For example, when the water mist...

Scroll to Top