how to keep misting nozzles from clogging?

1、 Water mist nozzle blocked due to installation problem

Improper installation of water mist sprinkler will cause hidden troubles for the water mist nozzle. For example, when the water mist nozzle is installed, the washer deviates from the axle center or the water mist nozzle is installed too tightly, so the spray effect of the water mist nozzle can not achieve the desired goal. How to block the water mist nozzle? If the water mist nozzle is damaged after installation, the problem can be solved by replacing the water mist nozzle.

2、 Corrosion and wear lead to blockage of water mist nozzle

With the delay of working time, the water mist nozzle will be gradually corroded or worn by the bath liquid. After the water mist nozzle is eroded or worn, the surface of the nozzle and the inner flow channel will gradually deform or increase, which will affect the flow rate of the water mist nozzle, the pressure of spray and the shape of the spray. It is difficult to repair the water mist nozzle after it is corroded and damaged by abrasion, so what should we do if the water mist nozzle is blocked? There is only one answer, that is to change the water mist nozzle without any problem.

3、 The water mist nozzle is blocked due to adhesion

After the water mist nozzle works for a long time, or when the solution in the tank is accelerated to evaporate due to various reasons, a dry solidification layer may be left on the inside and outside of the edge of the water mist nozzle due to splashing, atomization and chemical accumulation. As a result, the water mist nozzle or the inner flow channel will be blocked. What can I do if the water mist nozzle is blocked? We can ask the maintenance staff to clear up.

4、 Water mist nozzle blocked due to temperature damage

The water mist sprinkler works in the environment above the rated temperature for a long time. It will cause damage due to high temperature, such as the deformation of the water mist nozzle or the shape and deformation of the spray. If the water mist nozzle is damaged by high temperature, it proves that the water mist nozzle made of this material is not suitable for the working environment at that time. What should we do if the water mist nozzle is blocked? We should replace the water mist nozzle in a planned way to avoid unnecessary economic losses.

5、 The blockage of the nozzle leads to the blockage of the water mist nozzle

In the long-term spraying process of water mist nozzle, the dirt and impurities in the tank liquid will gradually accumulate in the mouth of water mist nozzle or in the inner pipe. When the water mist nozzle is blocked, the flow rate of the water mist nozzle will gradually decrease, which will affect the working pressure, spray shape and uniformity of liquid particles. How to block the water mist nozzle? If the water mist nozzle is blocked, it can be repaired and dredged. If the blockage is serious, it needs to be replaced with a new water mist nozzle.

Lastest Posts

How to Install Brass Misting Nozzles

Installation of atomizing nozzle seems simple, but if you do not pay attention to the small details of installation, it will also affect the atomization effect and service life of...

how to keep misting nozzles from clogging?

1、 Water mist nozzle blocked due to installation problem Improper installation of water mist sprinkler will cause hidden troubles for the water mist nozzle. For example, when the water mist...

Scroll to Top